30X30 Solar Cell Plate Solar Panels Monocrystalline

30X30 Solar Cell Plate Solar Panels Monocrystalline

Tempered Glass: Light transmission93%,could suffer from 5400pa impact Aluminum Frame: Lifespan is up to 25 years Terminal Box: Protection level is up to IP65 Import Silicon Wafer: Make sure that all the silicon waters are in good performance Application Solar Building Solar Photovoltaic Power...
Send Inquiry
Description
Technical Parameters

Moduel

XT325P-72

XT330P-72

XT330P-72

XT330P-72

XT330P-72

Rated Maximum Power at STC

325W

330W

335W

340W

350W

Open Circuit Voltage(Voc/V)

46.0

46.1

46.3

46.5

46.9

Maximum Power Voitage(Vmp/V)

37.17

37.6

37.9

38.2

38.5

Short Circuit Current(lmp/A)

9.05

9.28

9.36

9.45

9.6

Maximum Power Current(lmp/V)

8.74

8.78

8.84

8.9

9.09

Module Efficiency(%)

16.77

17.00

17.3

17.5

18.0

Power Tolerance

-0~+5W

Standard Test Condition(STC)

Irradiance 1000W/m2, Cell Temperature 25℃,Air Mass1.5

1651653

Tempered Glass:Light transmission93%,could suffer from 5400pa impact

Aluminum Frame:Lifespan is up to 25 years

Terminal Box:Protection level is up to IP65

Import Silicon Wafer:Make sure that all the silicon waters are in good performance

Application

图片5 图片6

Solar Building Solar Photovoltaic Power Generation

Buildings that use solar energy for heating and cooling. Photovoltaic power generation is based on the principle

The application of solar energy heating and cooling in the of photovoltaic effect, using solar cells to directly convert

building can save a lot of electricity, coal other energy, solar energy into electricity.Whether independently used

and does not pollute the environment, in the annual or grid-connected, photovoltaic power generation system

sunshine time is long, the air cleanliness is high,the sunlight is mainly composed of solar panels (modules), controllers

is sufficient and lack of other energy areas, the use of and inverters, which are mainly composed of electronic

solar heating and cooling, especially advantageous. components, but do not involve mechanical parts.

At present, solar energy buildings still have problems

such as large investment and long recycling life.

图片7 图片4

Solar Street Light Solar Thermal Collector

Powered by crystalline silicon solar cell, maintenance-free A solar collector is a device that converts the radiant energy

valve controller sealed battery (colloidal battery) is used to of the sun into heat energy.Because the solar energy is

store electric energy. Ultra-bright LED lamps are used as relatively dispersed, we must try to concentrate it, so the

light source and controlled by intelligent charging and collector is the key part of all kinds of solar energy devices.

discharging controller, which is used to replace traditional Due to different purposes, collector and its types are divided

public electric lighting street lamps.No cable laying, no ac into many kinds of matching system, have different names,

power supply, no electricity charge;Adopt dc power supply such as solar ovens for cooking, used to produce hot water

and photosensitive control;With good stability, long life, of solar water heater, solar dryer for dry goods, solar

high luminous efficiency, easy installation and maintenance, furnaces for melting metal, and the sun room, solar thermal

high safety performance, energy conservation and power plants, solar desalination device, etc.

environmental protection, economic and practical

advantages.It can be widely used in urban main and

secondary roads, residential areas, factories, tourist

attractions, parking lots and other places.

图片2 图片3

Consumer Solar Power Solar Communication Base Station

Solar cell modules composed of photovoltaic array, solar Solar communication base station is a kind of communication

charge and discharge controller, battery, off - grid inverter, base station based on photovoltaic power generation

dc load and ac load and so on.If the output power supply technology.Such base stations work very reliable, safe and no

is ac 220V or 110V, the inverter needs to be configured. noise and other pollution, public hazards, etc.It has the

The photovoltaic array converts the solar energy into advantages of simple installation and maintenance, low

electric energy under the condition of illumination. The operation cost,suitable for unattended, good compatibility and

load is supplied by the solar charge and discharge controller, wide availablerange.These advantages can largely solve the

and the battery group is charged at the same time.When problem of difficult power supply for base stations in remote

there is no light, the battery group will supply power to the areas.

dc load through the solar charge and discharge controller,

and the battery will also supply power to the independent

inverter directly, which will be inverted into alternating

current to supply power to the ac load.

Project

48+6452+图片24+6图片1

Workshop

图片1图片2

图片3图片4

Packing & Shipping

图片6图片7

图片8图片5

Hot Tags: 30x30 solar cell plate solar panels monocrystalline, China, suppliers, manufacturers, factory, wholesale, price, pricelist