Knowledge
Home > Knowledge > Content
High Pole Light
- Jul 27, 2018 -

High pole lamp is to point to the new lighting device of steel conical lamp pole and high power combination lamp holder of 15 meters above commonly. It is made up of lamp holder, internal lamp electric, rod body and foundation. Lamp head can be shaped according to user requirements, surrounding environment, lighting needs specific and decided; The internal lamps are mainly composed of floodlights and floodlights. The light source is NG400 high pressure sodium lamp with a lighting radius of 60 meters. The bar body is usually a pyramid - shaped single - body structure, made of steel plate, with a height of 15-40 meters, mostly two to three sections.


Configuration

1. The lamp pole is an octagonal, twelve-sided and octagonal pyramidal rod body, which is made of high strength and high quality steel plate through cutting, bending and automatic welding. The general height is 2, 3, 0, 3, 5, 40 and other specifications. The maximum wind-resistance capacity of the design can reach 60 meters per second. With flange steel chassis, diameter 1 m to 1 m. 2 m, thickness 30mm to 40m.
2. The functional structure is mainly frame structure, and the decorative materials are mainly steel pass and steel tube, while the lamp pole and lamp plate are hot-dipped zinc treatment.
3. The electric lifting system consists of electric motor, winch, three sets of hot dip galvanized steel wire rope and cable. The lamp pole is installed in the body and the lifting speed is 3 to 5 meters per minute.
4. The guide and unloading system consists of a guide wheel and a guide arm to ensure that the lamp disc will not move horizontally in the process of lifting and lifting, so as to ensure that the lamp disc will automatically fall off and be locked by the hook when it is in place.
5. The lighting electrical system is equipped with 6 -- 2 4 sets of 4 0 0 0 0 w -- 1 0 w golden halide (white light), projection and floodlight fixtures. The computer time controller can automatically control the time of switching off and on of the lights and partial or full lighting.
6. Lightning protection system: add 1 to the lamp top. 5 m long lightning rod, 1 m long ground wire is installed on the underground foundation and welded with the underground bolt.                                                                                                                                                                                                                                                                                                                                                                                         Author:Bunny Sun